Baumüller BM5566-FI06R03-0100-0528-00-01-E80-#01 is an industrial servo inverter belonging to the b maXX 5500 product family.

Manufacturer-Verified BM5566 Base-Drive Specifications:

• Manufacturer: Baumüller

• Product Family: b maXX 5500

• Base Drive: BM5566

• Product Type: Industrial Servo Inverter / Servo Drive

• Number of Controlled Axes: 1

• Frame Size: 6

• Rated Output Current: 350 A

• Maximum Output Current: 450 A

• Typical Motor Rating: 175 kW

• Overload Factor: 1.3

• Nominal Supply Voltage: 400 VAC

• Published Supply Voltage Range: 207–528 VAC

• Supply Frequency: 50/60 Hz

• Nominal DC-Link Voltage: 540 VDC

• External Electronics Supply: 24 VDC

• Published Switching Frequencies: 2 / 4 / 8 kHz

• Output Voltage: 0–95% of supply voltage

• Fan Supply for Frame Size 6: 230 VAC ±10%

• Air-Cooled Dimensions, W × H × D: 437 × 815 × 378 mm

• Water-Cooled Dimensions, W × H × D: 437 × 815 × 316 mm

• Published Product-Family Certifications: CE, CSA, UL

The published height and depth exclude mounting brackets. The air-cooled depth includes the required bending radius of connected cables.

Commercial Product Identification:

• Requested Model: BM5566-FI06R03-0100-0528-00-01-E80-#01

• Distributor-Reported Article Number: 06503389

• Serial Number Appearing in a Commercial Listing: 318061168

The reported serial number refers to one listed unit and does not apply to every BM5566 drive.

Exact-Configuration Details Requiring Verification:

• Complete interpretation of the FI06R03, 0100, 0528, 00, 01, E80 and #01 ordering segments.

• Actual cooling arrangement.

• Installed encoder and communication interfaces.

• Integrated safety functions.

• Hardware and firmware revisions.

• Drive parameter datasets.

• Included connectors and accessories.

• Applicable derating limits for switching frequency and ambient temperature.

Important: The 175kW figure is the manufacturer's typical motor rating for the BM5566 platform. It is not guaranteed continuous mechanical output under every operating condition.

Safety Notice: Hazardous DC-link voltage may remain after the mains supply is disconnected. Qualified personnel must follow Baumüller's electrical isolation and voltage verification procedures before servicing the drive.