Baumüller SET-BM4435-SI1-21642-S01-0315-7012-E80 is an industrial servo inverter set from the b maXX 4400 product family.

Manufacturer-Verified BM4435 Base-Drive Specifications:

• Manufacturer: Baumüller

• Product Family: b maXX 4400

• Base Drive: BM4435

• Product Type: Industrial Servo Inverter / Servo Drive

• Frame Size: 3

• Rated Output Current: 60 A

• Maximum Output Current: 90 A

• Typical Motor Rating: 28 kW

• Overload Factor: 1.5

• Air-Cooled Dimensions, W × H × D: 155 × 510 × 340 mm

• Water-Cooled Dimensions, W × H × D: 155 × 510 × 325 mm

The actual cooling arrangement of the requested SET has not been independently confirmed.

Additional BM4435 Universal Unit Electrical Data:

• Rated Input Apparent Power: 36.7 kVA

• Rated Input Current: 53 A

• Maximum Input Current: 71 A

• Nominal DC-Link Voltage: 540 VDC

• Internal DC-Link Capacitance: 2,000 µF

• Internal DC-Link Discharge Time: 340 seconds

• Rated Output Current at 4kHz: 60 A

• Peak Output Current at 4kHz: 90 A

• Rated Output Current at 8kHz: 48 A

• Peak Output Current at 8kHz: 72 A

• Maximum Peak Current Duration: 60 seconds

• Output Frequency at 4kHz: 0–450 Hz

These additional electrical values apply to the BM4435 Universal Unit described in the manufacturer's instruction handbook. Their applicability to the exact SI1-21642 SET configuration has not been independently established.

Commercial Product Identification:

• Requested Model: SET-BM4435-SI1-21642-S01-0315-7012-E80

• Distributor-Reported Article Number: 0006477645

• Possible Shortened Article Number: 06477645 — requires confirmation.

Exact-Configuration Details Requiring Verification:

• Complete interpretation of the SI1, 21642, S01, 0315, 7012 and E80 ordering segments.

• Actual components included in the SET.

• Cooling arrangement.

• Installed encoder and industrial communication interfaces.

• Integrated safety functions.

• Hardware and firmware revisions.

• Supplied drive parameter datasets.

• Included connectors and accessories.

• Compatibility with other BM4435 variants.

Important: The 28kW figure is the manufacturer's typical motor rating for the BM4435 platform. Final drive selection must account for motor current, duty cycle, switching frequency and cooling conditions.

Safety Notice: Hazardous DC-link voltage may remain after power disconnection. Installation and servicing must be performed by qualified personnel following the manufacturer's electrical isolation and voltage verification procedures.