Baumüller SET-BM4433-SI1-21642-S01-0315-7012-E80 is an industrial servo inverter set from the b maXX 4400 product family.

Manufacturer-Verified BM4433 Base-Drive Specifications:

• Manufacturer: Baumüller

• Product Family: b maXX 4400

• Base Drive: BM4433

• Product Type: Industrial Servo Inverter / Servo Drive

• Frame Size: 3

• Rated Output Current: 30 A

• Maximum Output Current: 60 A

• Typical Motor Rating: 13 kW

• Overload Factor: 2

• Nominal Supply Voltage: 400 VAC

• Published Supply Voltage Range: 207–528 VAC

• Supply Frequency: 50/60 Hz

• Nominal DC-Link Voltage: 540 VDC

• External Electronics Supply: 24 VDC

• Published Switching Frequencies: 2 / 4 / 8 / 16 kHz

• Cooling Fan Supply for Frame Size 3: 24 VDC

• Air-Cooled Dimensions, W × H × D: 155 × 510 × 340 mm

• Water-Cooled Dimensions, W × H × D: 155 × 510 × 325 mm

• Published Product-Family Certifications: CE, CSA, UL

The actual cooling arrangement of the requested SET has not been confirmed.

Additional BM4433 Universal Unit Electrical Data:

• Rated Input Apparent Power: 16.8 kVA

• Rated Input Current: 24.2 A

• Maximum Input Current: 45 A

• Nominal DC-Link Voltage: 540 VDC

• Internal DC-Link Capacitance: 1,230 µF

• Internal DC-Link Discharge Time: 210 seconds

These electrical figures are published for the BM4433 Universal Unit and must not be treated as independently verified characteristics of the exact SI1-21642 SET configuration.

Commercial Product Identification:

• Requested Model: SET-BM4433-SI1-21642-S01-0315-7012-E80

• Distributor-Reported Article Number: 06477643

Exact-Configuration Details Requiring Verification:

• Complete interpretation of the SI1, 21642, S01, 0315, 7012 and E80 ordering segments.

• Actual components included in the SET.

• Cooling configuration.

• Installed encoder and industrial communication interfaces.

• Integrated safety functions.

• Hardware and firmware revisions.

• Supplied drive parameter datasets.

• Included connectors and accessories.

• Compatibility with other BM4433 variants.

Important: The 13kW figure is the manufacturer's typical motor rating for the BM4433 platform. It is not guaranteed continuous mechanical output under every operating condition.

Safety Notice: Hazardous DC-link voltage may remain after power disconnection. Installation and servicing must be performed by qualified personnel following Baumüller's electrical isolation and voltage verification procedures.