Baumüller BM1425-01-00-01 is an industrial AC frequency converter belonging to the b maXX 1000 product family.

Manufacturer-Verified BM1425 Specifications:

• Manufacturer: Baumüller

• Product Family: b maXX 1000

• Model: BM1425-01-00-01

• Product Type: Frequency Converter / AC Inverter

• Frame Size: 2

• Typical Motor Power: 2.2 kW

• Rated Output Current: 5.5 A

• Maximum Output Current: 8.25 A

• Overload Factor: 1.5

• Overload Duration: 60 seconds

• Input Supply: Three-phase 380–480 VAC ±10%

• Supply Frequency: 47–63 Hz

• Switching Frequency: 1–15 kHz

• Adjustable Output Frequency: 0.1–400 Hz

• Protection Rating: IP20

• Dimensions, W × H × D: 100 × 174 × 152 mm

The published height and depth include mounting brackets. The depth does not include the required cable bending clearance.

Product-Family Features:

• Vector control for standard AC motors.

• Integrated standard EMC filter.

• Drive monitoring and protection functions.

• 15 preset speeds.

• CANopen connectivity as described in the product-family documentation.

• Published operating temperature range: -10°C to +50°C, subject to installation conditions; the upper limit may be reduced to +40°C when units are mounted closely together.

Product Identification:

• Requested Model: BM1425-01-00-01

• Distributor-Reported Article Number: 00399882

• Supply Category: Three-phase 400V frequency converter.

Details Requiring Verification:

• Manufacturer article number on the actual product nameplate.

• Current production and stock availability.

• Hardware and firmware revisions.

• Communication configuration and included accessories.

• Compatibility with an existing drive installation.

• Applicable derating requirements.

Important: The 2.2kW value is the manufacturer's typical motor rating. Final drive selection must consider the motor's rated current, load characteristics and operating conditions.

Safety Notice: Hazardous voltage may remain in the DC-link capacitors after disconnection from the mains supply. Installation and maintenance must be performed by qualified personnel following the manufacturer's safety instructions.