Rotary Cam Switch LNSW Leonard Engineering Gmbh

Leonard rotary  cam switches LNSW are cased in housings made of cast aluminum and fitted out with mechanic switching elements. The technical data of all available switching elements . The rotary cam switches LNSW are normally available with 3, 6, 9 and 12 switching elements. The cam shaft (spindle) comes out on both sides of the housing so that several switches can be coupled together. The second end of the shaft, which is normally unused, is protected by a safety cover. The cam shaft is mounted in two deep groove ball bearings and maintenance-free.

To actuate the individual switching elements the cam shaft is fitted with cam disk sets in a pitch of 30 mm. Each cam disk set consists of the components . The infinitely adjustable cam disk sets, which run almost entirely free from unbalance by virtue of their special design, are individually tensioned by disc springs. This tension is such that all cam disk sets can be adjusted when the clamp nut is slackened. After setting all the cam disk sets the complete adjustment can be checked on start up for trial operation. Only after all switching adjustments have been tested, the clamp nut is tightened against the disc spring. All cam disk sets are positively located in the position set.

LNSW 03 
LNSW 06 
LNSW 09 
LNSW 12