Contact consultant

Hotline

support@ansgroup.asia

0911472255

Product information
Specifications

Measuring transducers DIw-MU Muller Ziegler Vietnam

Mueller+Ziegler Measuring transducers

Application

Measuring transducers are designed for the conversion and galvanic isolation of varied measuring signals in heavy-current and weak-current engineering. The input variable is converted to a proportional output signal to standard values of e.g. 20 mA and (or) 10 V.

A frequency or pulse output is possible as well. Measuring transducers are indispensable where measuring values must be transmitted over long distances or at different locations for indication and evaluation.

Type and function

The output signal is an impressed direct current and (or) direct voltage; it is nonsensitive to interference signals, external magnetic fields as well as to distortion due to signal lines of varying lengths. Within the load range, the accuracy remains uninfluenced by different internal resistances of individual or also several evaluation instruments, like e.g. switchgear and measuring devices, controlling equipment, recorders, PLC systems etc. (when using both outputs simultaneously, the max. current which may be supplied to the voltage output is 1 mA, connecting both outputs is not permissible). In case of most measuring transducers, an auxiliary voltage is generated from the measuring voltage, an additional auxiliary voltage ist not required.

Measuring transducers have a fully electronic design and dispose of no mechanical parts; they are thus largely immune to environmental influences and suited for use under rough operating conditions.

Special features of Mueller+Ziegler Measuring transducers

Simple installation, no programming required
Accuracy class 0.5
Analog (continuous) measurement
Analog output immune to noise
Setting option of zero point and span from front side
Double output
Calibrated double output switchable at the front using switch between 0-20 mA / 0-10 V and 4-20 mA / 2-10 V for transducers for direct current variables, rms value, process parameters and operands.
To be combined with frequency output and relay module
4 kV test voltage, also in case of DC auxiliary voltage between input, output and auxiliary voltage
All transducers also with auxiliary voltage for 36-265 V AC + DC or 6-30 V AC + DC and 4 kV test voltage
Small design (22.5 mm housing width)

Mueller+Ziegler Measuring transducers Product ranges:

No	Code	Desription
1	DIw-MU	Measuring transducers for alternating current (sinusoidal) for direct connection up to 50 A , 60 A, 100 A or 150 A
2	Iw-MU	Measuring transducers for alternating current (sinusoidal) to current transformer and direct measurement 1 A or 5 A or 10 A
3	Uw-MU	Measuring transducers for alternating current (sinusoidal)
4	Ieff-MU / Ueff-MU	Measuring transducers for current and voltage (True RMS)
5	IeffT-MU / UeffT-MU	Measuring transducers for current and voltage (True RMS) for systems up to 1000 V (CAT III)
6	F-MU	Measuring transducers for frequency
7	Phwd-MU	Measuring transducers for phase angle (power factor)
8	Pw-MU, Pz-MU, Pnz-MU, Pd-MU, Pdr-MU	Measuring transducers for active power of alternating current and three-phase current
9	PwB-MU, PzB-MU, PnzB-MU, PdB-MU, PdrB-MU	Measuring transducers for reactive power of alternating current and three-phase current
10	MFPw-MU, MFPz-MU, MFPnz-MU, MFPd-MU, MFPdr-MU	Measuring transducers for active power at medium frequencies (frequency range DC/10 Hz – 20kHz)
11	Multi-E4-MU	Universal transducers with Ethernet interface with HTTP, TCP/IP, Modbus TCP protocol with 4 configurable analog outputs
12	Multi-E11-MU	Universal transducers with Ethernet interface with HTTP, TCP/IP, Modbus TCP protocol with 11 configurable analog outputs
13	Multi-E-MU	Universal transducers with Ethernet interface with HTTP, TCP/IP, Modbus TCP protocol with 2 limit or pulse outputs
14	PGs-MU	Measuring transducers for DC power
15	PGsT-MU	Measuring transducers for DC power for systems up to 1000 V (CAT III)
16	IgT-MU, UgT-MU	Measuring transducers for direct current and direct voltage
17	IgTT-MU, UgTT-MU	Measuring transducers for direct current and direct voltage for systems up to 1000 V (CAT III)
18	NgT-MU	Measuring transducers for standard signals with selectable calibrated inputs and outputs
19	NoH-MU	Measuring transducers for standard signals without auxiliary energy
20	Pt-MU	Measuring transducers for temperature (resistance thermometer)
21	Th-MU	Measuring transducers for temperature (thermocouple, to DIN EN 60 584)
22	W-MU	Measuring transducers for resistance teletransmitter
23	TSM-MU	Measuring transducers for process variables, parametrisable by USB
24	DMS-MU	Measuring transducers for pressure transmitter (with 4-arm strain gauge full bridge)
25	D-MU	Measuring transducers for speed
26	Sum-MU	Measuring transducers for displaying sum values