Elektrogas VMR6-60.C – 2-Inch 6-Bar Fast Opening and Closing Safety Gas Solenoid Valve
Price: Contact
Brand: Delta Elektrogas
Category: Thiết bị điều khiển van công nghiệp
Supplier: AnhNghiSon
Origin: Italy
Product Identification
-
Manufacturer: Delta Elektrogas.
-
Model: VMR6-60.C.
-
Product Family: VMR / VMR60.
-
Product Type: Safety Gas Solenoid Valve.
-
Normal Position: Normally Closed.
-
Opening Action: Fast Opening.
-
Closing Action: Fast Closing.
-
Reset Type: Automatic Reset.
Ordering Code Interpretation
-
VMR: Fast-opening safety solenoid valve.
-
6: Nominal 2-inch size.
-
-60: Maximum operating pressure of 6 bar.
-
No N suffix: Standard Rp threaded connection.
-
.C: 24V AC/DC voltage designation.
Technical Specifications
-
Nominal Connection Size: Rp 2 inches.
-
Maximum Operating Pressure: 6 bar.
-
Supply Voltage Code: 24V AC/DC.
-
Opening Time: Less than 1 second.
-
Closing Time: Less than 1 second.
-
Standard Protection Rating: IP54.
-
Duty Cycle: 100% ED, continuous service.
-
Compatible Media: Air and non-aggressive gases, families 1, 2 and 3 according to EN 437.
-
Body Material: Die-cast aluminum alloy.
Operating Principle
The valve remains closed when the solenoid coil is not energized. Applying the appropriate electrical supply opens the valve. Removing electrical power causes the valve to close rapidly.
Typical Applications
-
Industrial gas burner systems.
-
Gas train assemblies.
-
Industrial furnaces and kilns.
-
Gas-fired boilers.
-
Industrial heating equipment.
-
Automated gas shut-off systems.
Standards and Approvals
-
Manufacturer-stated EN 161 compliance for the VMR product family.
-
Product-specific certification and approval documents must be checked for the supplied configuration.
Configuration Verification
-
Confirm the exact VMR6-60.C ordering code.
-
Verify whether the 24V coil is intended for AC or DC operation.
-
Confirm the Rp 2-inch threaded connection.
-
Verify the maximum operating pressure.
-
Check required gas flow and pressure drop.
-
Confirm electrical connection accessories.
-
Verify compatibility with the existing burner safety control system.
Safety Notice
Gas safety valves must be installed and commissioned by qualified personnel. Leak-tightness testing and functional safety checks must be completed according to manufacturer instructions and applicable regulations.

