EDS CS5-350 HDR – Complete Optoelectronic Weld Hole Detection System
Price: Contact
Brand: EDS S.r.l.
Category: Cảm biến công nghiệp
Supplier: AnhNghiSon
Origin: Italy
EDS CS5-350 HDR belongs to the CS5-350 optoelectronic weld hole detection system, designed to detect marker holes indicating weld positions on moving metal strips.
Product Identification:
-
Manufacturer: Electronic Design System EDS S.r.l.
-
Main Model: CS5-350 HDR.
-
Product Family: CS5-350.
-
Product Type: Optoelectronic Weld Hole Detector.
-
Requested Configuration: CS5-350 HDR + CS5-HDT + RX cables.
-
Detection Technology: Optoelectronic.
-
Product Family Light Source: LED.
Requested System Configuration:
-
CS5-350 HDR: One set.
-
CS5-HDT: Included component according to the requested description.
-
RX cables: Included connection cables.
The exact cable quantities, cable lengths, connector types and manufacturer-approved packing list have not been independently verified.
Manufacturer-Confirmed Product Features:
-
Detection of holes marking weld lines on metal strip material.
-
Optoelectronic detection principle.
-
High immunity to ambient light.
-
Manufacturer-stated compliance with EMC requirements.
These features are confirmed for the CS5-350 product family on the official EDS website.
Distributor-Published Reference Specifications for CS5-350:
-
Light Source: LED technology.
-
Minimum Detectable Hole Size: 3 mm.
-
Material Speed: 5–2,000 m/min.
-
Detection Response: 5 ms.
-
Detection Width: 350 mm.
-
Optional Detection Width: 500 mm.
-
Maximum Transmitter-to-Receiver Gap: 2 m.
-
Optical Alignment: Indicator LED.
-
Ambient Light Immunity: Frequency modulation.
-
Relay Output: Maximum 250 VAC, 5 A.
-
Optocoupled Output: Maximum 70 V, 50 mA.
-
Adjustable Output Signal Duration: 40–200 ms.
-
Reference Dimensions: 505 × 65 × 170 mm.
-
Ambient Temperature: -30°C to +65°C.
-
Reference Weight: 3.5 kg per unit.
-
Protection Rating: IP65.
-
Reference Power Supply: 230 VAC, 20 VA.
These values are published by a distributor for the CS5-350 series. They have not been verified against an official datasheet for the exact requested HDR/HDT assembly.
Additional Commercial Reference:
A separate EDS commercial catalogue describes the CS5-350 system as capable of detecting 5mm holes at material speeds exceeding 1,200m/min.
This differs from the 3mm minimum hole size and 2,000m/min maximum speed published by the Vietnamese distributor. The underlying test conditions and configuration differences remain unverified.
Operating Principle:
The system uses an optical transmitter and receiver arrangement positioned around the moving metal strip.
When a weld marker hole passes through the detection area, the optical receiver detects the transmitted light signal.
The detection event can then be used by a connected industrial control system for application-specific monitoring, synchronization or process control.
Typical Industrial Applications:
-
Steel strip processing lines.
-
Weld marker detection in continuous production.
-
Metal coil joining position monitoring.
-
Metal strip cutting and processing systems.
-
Industrial metal finishing lines.
-
Automated equipment requiring weld position identification.
Verification Scope:
The CS5-350 product family and its weld marker hole detection function have been confirmed through the manufacturer's official website.
The complete HDR + HDT + RX cable configuration is based on the supplied product description. Exact manufacturer documentation for the individual assembly components has not yet been obtained.
Exact-Configuration Details Requiring Verification:
-
CS5-350 HDR hardware version.
-
Exact CS5-HDT part number and quantity.
-
RX cable lengths and connector types.
-
Operating supply voltage.
-
Detection output configuration.
-
Detection width and hole size requirements.
-
Transmitter-to-receiver installation distance.
-
Mechanical mounting dimensions.
-
Environmental protection rating for the supplied configuration.
-
Complete manufacturer packing list.
Replacement Considerations:
Verify the original equipment nameplates, wiring diagrams, optical alignment requirements, power supply and output signal compatibility before replacement.
Different CS5-350 configurations must not be assumed directly interchangeable without manufacturer confirmation.
Safety Notice:
Installation and maintenance must be carried out by qualified personnel. Isolate electrical power and prevent unintended movement of the production line before performing mechanical or electrical work.

