![](/Images/products/bo-hien-thi-f805at-unipulse.png)
Bộ hiển thị F805AT Unipulse
Price: Contact
Brand: Unipulse
Category: Thiết bị tự động hóa
Supplier: ANS Vietnam
Origin: 100% Japan Origin
Ứng dụng sản phẩm: Automotive
Unipulse Vietnam,Bộ hiển thị F805AT Unipulse
F805AT
Graphic display/touch panel type all-in-one type weighing indicator
Product outline
F805AT adopts a color LCD touch panel which enables simple and comfortable operation by greatly enhancing the visibility of weight display, various setting values display and status display. It provides high-speed A/D conversion and digital processing capability at an operating speed of 1000 times/sec There are substantial interfaces that allow direct connection to major PLCs including OMRON DeviceNet and MITSUBISHI CC-Link. F805AT, which was developed specifically for weighing systems, is a full-fledged device of an all-in-one type that deserves to be called the top-of-the-line Weighing indicator.
Specifications
Analog section|Setting section|I/O section|Display section|General performance|Option|Attachments
Analog section |
|
Excitation voltage |
10V or 5V DC±5% (digital adjustment), Output current; within 120mA, remote sense type (Up to 4 loadcells at 350Ω are parallel-connectable.) |
---|---|
Zero adjustment range |
0 to approx. 2mV/V (digital adjustment) |
Gain adjustment range |
0.3 to 2.0mV/V (digital adjustment) |
Min. input sensitivity |
0.3μV/count (at valid 1/4 scale division),
|
Accuracy |
Non-linearity: within 0.01%/FS (Typ: 0.005%/FS at room temperature)
|
Analog filter |
Bessel low-pass filter (-12dB/oct.)
|
A/D converter |
Speed: 1000 times/sec (switchable to 200 times/sec.)
|
Min. display resolution |
1/10000 (at valid 1/4 scale division), 1/40000 (at invalid 1/4 scale division) |
Secondary calibration |
Equivalent input calibration method that allows calibration by simply key-inputting the rated value of a sensor without applying an actual load
|
Setting section |
|
Setting method |
– Setting by touch panel operation
|
---|---|
Setting value storage |
– Default: NOV RAM (nonvolatile RAM)
|
Setting value protection |
Setting operation can be locked to prevent unauthorized modifications of default values and calibration by malfunction (LOCK) |
I/O section |
|
External signal output |
– Logic: Transistor’s open collector output (Emitter = COM terminal); Output is LO when transistor is ON.
|
---|---|
External signal input |
– Input is ON when shorted to COM terminal by contact (relay switch, etc.) or non contact (transistor, open collector, etc.).
|
Weighing code selection input |
BCD 2 digits (00 to 99), 100 codes |
Interface |
– SIF: 2-wire type serial interface (standard): Interface to link with Unipulse printer or external display
|
Display section |
|
Display |
TFT color LCD (Display area 116.8 (W) x 88.0 (H) [mm], 320 x 240 dot |
---|---|
Weight value display |
5 digits, Minus sign on most significant digit |
Unit |
Selectable from t, kg, g, N, lb, none |
Decimal point |
Selectable 0, 0.0, 0.00, 0.000 |
Display update rate |
Selectable from 3, 6, 13, 25 times/sec (A/D conversion rate is fixed.) |
Scale capacity |
5-digit numerical values (up to 99999) |
Over display |
LOAD: A/D converter input over, OFL1: Net weight > Net over set value (5-digit setting), OFL2: Gross weight > Capacity +9 scale divisions, OFL3: Gross weight > Gross over set value (5-digit setting) |
Center zero |
True zero point (0±1/4 scale) or the center of each value is displayed |
Status display |
LOCK, HOLD, ZALM, STAB, TARE, RUN, HI, LO, NZ, SP1, SP2, SP3, OVER, GO, UNDER, COMPL, DCHG |
Set value display |
CODE, FINAL, OVER, UNDER, BEFORE FINAL, FF |
Accumulation display |
Accumulation times (4 digits), Accumulation value (9 digits) |
No. display |
Alarm No. (2 digits): Error No. in sequence control
|
General performance |
|
Excitation voltage |
100 to 240V AC (+10% -15%) (Free power supply 50/60 Hz)
|
---|---|
Power consumption |
20W |
Inrush current (Type) |
15A, 5msec: 100V AC average load condition (cold start at room temperature)
|
Operating conditions |
Temperature: Operating temperature range -10 to +40°C;
|
Dimensions |
174(W)×135(H)×159(D)mm (protruding part not included) |
Panel cutout dimensions |
165W(+2-0)×130H(+2-0)mm |
Panel thickness |
1.6 to 3.2mm |
Weight |
Approx. 2.3kg |
CE marking certification |
EMC directives EN61326-1
|
Option |
|
BCO |
BCD parallel data output interface |
---|---|
BCI |
BCD parallel data input interface |
DAC |
D/A converter interface (2ch interface installed) |
485 |
RS-485 communication interface* |
ODN |
DeviceNet interface* |
CCL |
CC-Link interface* |
Number of option installations |
Up to 4 options and 1 serial communication interface are available. (With*, only 1 option is available.) |
Attachments |
|
AC input cord (2m), (only for AC specifications) |
1 |
---|---|
AC input cord replacement plug (only for AC specifications and CE compatibility) |
1 |
Mini-driver for terminal block connection |
1 |
Loadcell connector |
1 |
External I/O signal connector |
1 |
Operation Manual |
1 |
Ferrite core (only for CE compatibility) |
2 |
BCD output connector (with BCD output option) |
1 |
BCD input connector (with BCD input option) |
1 |
D/A converter connector (with D/A converter) |
1 |
CC-link connector (with CC-Link option) |
1 |
DeviceNet connector (with DeviceNet option) |
1 |
Option
Model |
Interface |
Slots installed |
BCO |
BCD parallel data output interface
|
1 to 3 |
---|---|---|
BCI |
BCD parallel data input interface
|
1 to 3 |
DAC |
D/A converter interface
|
1 to 3 |
485 |
RS-485 communication interface
|
4 |
ODN |
DeviceNet interface
|
4 |
CCL |
CC-Link interface
|
4 |
Optional accessories
Model |
Description |
CAAC3P-P2 |
AC input cord 2m |
---|---|
CAAC3P-CEE7/7-P1.5 |
AC input cord (withstand pressure: 250V) 1.5m |
CA4131 |
(6-core) cable with JR connector at one end (cable end is separated) 3m |
CA4230 |
JR-PRC conversion relay (6-core) cable 0.3m |
CA4311 |
JR-PRC conversion relay (6-core) 4-wire type/ 6-wire type (for 520A) 1m |
CN3P-2P |
3P-2P conversion plug for AC input cord |
CN20 |
D/A converter connector |
CN21 |
BCD I/O connector |
CN22 |
57 series 50p connector for external I/O |
CN34 |
D-Sub 9p connector for RS-232C |
CN71 |
CC-Link connector |
CND01 |
DeviceNet connector |
TSU02 |
Lightning surge unit |
TSU03 |
Lightning surge unit DS specification |
GMP165×130 |
Rubber packing |
100% Japan Origin |
Unipulse Vietnam |
Replaced code: F805AT
|
Liên hệ & Báo giá chi tiết:
Sale ANS Vietnam:
support@ansgroup.asia
Trực tiếp Zalo: 0911472255
=====================================================
Click xem thêm ứng dụng sản phẩm khác
Đại lý phân phối chính hãng tại Vietnam
Báo giá ngay – Hàng chính hãng – Bảo hành 12 tháng – Tư vấn hỗ trợ kỹ thuật 24/7
Xem thêm sản phẩm hãng Unipulse tại đây