Noeding Vietnam đại lý hãng Noeding Meßtechnik tại Vietnam
ABOUT NOEDING VIETNAM:
Five decades Nöding Meßtechnik
1958 - 2019
The company was founded in 1958 by Mr. Gustav Noeding and focussed initially on commercializing revolution counters and gauges with electrical contacts. In-house design and production of temperature instruments and controllers, transmitters and isolation amplifiers was introduced as a natural developement of the company.
In 1987 Ralf Noeding took over from his father and the company was converted into Noeding Messtechnik GmbH, a limited liability company.
The markets showed in the last decades an ever increasing requirement for pressure measurement. As a logical consequence, Noeding Messtechnik specialized in the design and production of pressure transmitters. In 2001 the company relocated to a new facility, where today substantial quantities of transmitters are being produced for OEMs, endusers, retailers etc..
TYPICAL PRODUCTS NOEDING VIETNAM:
1. PRESSURE TRANSMITTER NOEDING:
Safety note:
The pressure transmitter is designed for measuring absolute and gauge pressure of gases, vapours and liquids. If used incorrectly, application related dangers may arise. The transmitter must be installed, connected, commissioned, operated and maintained only by qualified and authorised personnel and under strict observance of these operating instructions, relevant national standards, legal requirements, and where appropriate, the product certification.
Installation:
The function of the transmitter is nearly independent of its orientation. To protect the process connection and pressure diaphragm from damage, remove the protective cap just before installation. The pressure transmitter must be installed in accordance with applicable national guidelines for pressure components. We recommend the use of isolating valves, syphons etc.. During installation, ensure that no water enters the housing.
2. DEGITAL PRESSURE GAUGE:
Safety notes:
The digital contact pressure gauge is designed for measuring absolute and gauge pressure of gases, vapours and liquids. If used incorrectly, application related dangers may arise. The transmitter must be installed, connected, commissioned, operated and maintained only by qualified and authorised personnel and under strict observance of these operating instructions, relevant national standards, legal requirements, and where appropriate, the product certification.
Installation:
The function of the transmitter is nearly independent of its orientation. To protect the process connection and pressure diaphragm from damage, remove the protective cap just before installation. The pressure transmitter must be installed in accordance with applicable national guidelines for pressure components. During installation, ensure that no water enters the housing.
ANS đại lý chính hức hãng Noeding Vietnam – Đại lý hãng Noeding tại Vietnam
Liên hệ ngay để nhận báo giá mới nhất về sản phẩm Nodeding tại vietnam
Xem thêm về ANS Vietnam – Đại lý chính thức hãng Noeding tại vietnam
