Aftercoolers CoolPro - WE/WF MTA S.P.A Vietnam

CoolPro - WE/WF - Water cooled aftercooler
Air flow 1,5 - 640 m³/min.

Final water coolers from the CoolPro – WE/WF series allow the efficient and economical purification of compressed air by cooling the air at the outlet of the compressor at an outlet temperature of only 10°C higher than that of the inlet water. This cooling causes condensation of up to 80% of the moisture present in the compressed air that can be separated thanks to an AS/MS centrifugal condensate separator installed at the outlet of the cooler.
The WE/WF final coolers consist of a shell and tube exchanger cooled in perfect countercurrent by a flow of cooling water.

Benefits:

• Robust design suited to the extreme conditions of typically industrial tasks;
• Helical exchanger pipes for maximum heat exchange efficiency and minimum pressure loss;
• Heat exchange in perfect countercurrent;
• Suitable for any requirement and application; 
• Combined condensate separators; 
• Flanges from WF225 to WF 6400 and nipple from WF 015 to WF 165 included.

Technical specifications:

• Copper helical exchanger pipes;
• Vessel made of carbon steel protected by primer painting + water-soluble acrylic varnish;
• Centrifugal condensate separator included;
• Maximum operating pressure: 16 bar(g) (WF015-1030) and 10 bar(g) (WF1250-6400);
• Maximum temperature compressed air inlet: 200°C.

Accessories:

• Version for vertical installation;
• FixedXremovable tube and shell;
• Version with copper pipes and layer made of carbon steel for standard applications;
• Version with pipes and layer made of stainless steel for applications with aggressive cooling gas and water; 
• Version with stainless steel pipes and layer made of carbon steel for applications with aggressive gases;
• Version for high operating pressure: 40 bar(g) and beyond (special);
• Version with pipes and layer in copper-nickel for use in the marine environment;
• Condensate drains: timed/capacitive.